Glance Card
Getting Started with Rundoo · Hardware Set-up
Set Up Your Receipt Printer
Star Micronics TSP100IV, box to first receipt. The whole thing in three moves, plus the fastest fixes.
The whole setup in three moves
1
Unbox & load paper
Power it on, drop the roll in. Feeds off the bottom, out the front.
Blank receipt = roll upside down
2
Get it on the network
Wired is most reliable. No port nearby? Wi-Fi works the same.
Ethernet or Wi-Fi
3
CloudPRNT & test
Turn on CloudPRNT, send Rundoo the MAC, run a test sale.
A receipt slides out
Print the self-test
- Flip the power switch off
- Hold down the Feed button
- Still holding, flip power back on
- Let go. The sheet has the IP and MAC
CloudPRNT: get these right
device.stario.online/cloudprnt/rndo
Password rundoo (default is public) · Polling Time 1 sec · wireless printers send the LAN MAC, not the WLAN one.
Lost connection to Stario? Power the printer off for about 30 seconds, then hold the Feed button while powering it back on to run a self-print. That confirms it rejoined the network, and printing resumes on its own.
Set up but not printing? Nine times out of ten the printer and Rundoo are on different networks. Put them on the same one. Still stuck: re-check the Server URL, or see Printer troubleshooting.
The fussy one is behind you. · rundocs.com